Here are my initial inspiration boards and sketches:
Since the show I have had a couple requests for orders on these dresses, so now my next task is to figure out manufacturing hand dyed pieces. Stay tuned!
Xoxo
This past week I had the privilege of showing a few of my looks at Minneapolis/St.Paul Fashion Week Emerging Designer Showcase. The show was put on by Jahna Peloquin of L'etiole magazine at the Co Exhibit in NE Minneapolis. I and four other fashion designers were paired with five accessory designers to showcase our Autumn/Winter 2012 looks. The show featured designers YQY by Vivian with jewelry by KR Designs, Nicole Larson with accessories by Lefthand Originals, Gina Marie Vintage with jewelry by Camba, Caroline Hayden with jewels by Via Patina, and I paired with accessories by Vanessa Zahid. The show had a great mix of fashion, art and music by OSO and Mayda. It was a great turnout and I want to thank everyone who made it to the show. Here are my initial inspiration boards and sketches: Since the initial trend concept and sketches, I did make a couple changes. I was planning on adding piping detailing, bows and beading but after dyeing the fabric I realized there was too much going on. The color spoke for itself. What do you guys think? Here are some photos I took on my i-phone ( you can probably tell I am obsessed with instagram right now :) ) Overall I was happy with how things turned out. It was a little nerve racking dyeing my garments just days before the show but everything went well. There was a great write up in city pages on the show, check it out here.
Since the show I have had a couple requests for orders on these dresses, so now my next task is to figure out manufacturing hand dyed pieces. Stay tuned! Xoxo
0 Comments
In a previous post I shared my interest in learning how to dye fabric and try out the ombre effect. Well, I gave it a shot. I was working on a few outfits for a show I had coming up for fashion week and thought it would be the perfect opportunity to try it out. Overall I was pretty happy with the outcome. I will share my process with you below. First off the supplies I used were: - Rit Dye o you can use powder or liquid, I went with liquid o I found rit dye at Joann fabrics, or you can order off of the Rit website - White fabric o Needs to be of a natural fiber such as cotton, silk, rayon, linen or nylon (will not work with polyester) o You can use a colored fabric as well as long as it is a natural fiber - White cotton thread o Only if you plan on dying the whole garment, that way the thread will match - Metal Spoon - Plastic gloves o Make sure to get ones that go higher up on your wrists, I didn’t and ended up with a blue ring around my hand :( - 3 gallon buckets o If you are using different colors, I would get a bucket for each color - 1 cup White vinegar for each color o Helps absorb the dye with darker colors - Wire hangers o Hang fabric from after being dyed - Old towels o Quick clean up for any spills - Plastic table cloth o Put on the floor to avoid any spills Steps 1) The Rit website recommends washing the fabric first to get rid of any chemicals that might interfere with the dye. I did not do this since I was working with lace and silk and it worked fine without it 2) Cover the floor or surface with a plastic cloth, this is a must so it does not stain your floor! 3) Prepare the dye a. I used two different colors so I made two different buckets of color. I boiled 2 pots of water (the hotter the water, the more color it absorbs). Then pour the hot water into the buckets. b. Read the bottle of dye for instructions on how to mix the colors. Each color will have a different recommendation. You also need to consider if you are dying yards of fabric or an already sewn garment for how much dye to add. c. Add vinegar if bottle requires it (salt is also another ingredient to add if suggested on bottle). d. Stir with the metal spoon 4) Wet fabric (I used another bucket for this). Squeeze out extra water. You are now ready to dye the fabric 5) Immerse the fabric in the dye (make sure you are wearing your gloves ). 6) Pull fabric out in increments to give it an ombre effect (leave in for 2 minutes and pull two inches out, continue this until all the fabric is out of bucket) a. Depending on the colors chosen and the effect you want you can vary the time 7) Remove fabric from dye bath and wring out extra dye. Rinse fabric with cool running water, holding the lightest color at top. Then rinse fabric in warm water until water runs clear. a. Make sure to have towel handy if you need to clean anything up 8) Hang fabric to dry a. I recommend hanging in a shower and placing a towel or plastic underneath the fabric to catch any drips that occur. 9) Let sit and dry overnight Voila, you will now have given your fabric an ombre effect (if everything went correctly) I decided to dye my garments already sewn together. I think next time I will dye the fabric first, just to make it easier and to avoid any mistakes. I wanted the ombre effect to be placed at specific places on the garments so that is why I did it this way. See below for some photos of the process: Check back soon to see my finished garments that were shown at Emerging Designer Showcase.
|
Marissa Bridges" We are shaped and fashioned by what we love" Johann Wolfgang Von Goethe Archives
June 2013
Categories
All
|